How To Install and Secure phpMyAdmin on Ubuntu 14.04


While many users need the functionality of a database management system like MySQL, they may not feel comfortable interacting with the system solely from the MySQL prompt.

phpMyAdmin was created so that users can interact with MySQL through a web interface. In this guide, we’ll discuss how to install and secure phpMyAdmin so that you can safely use it to manage your databases on Ubuntu 14.04.


Before you get started with this guide, you need to have some basic steps completed.

First, we’ll assume that you are using a non-root user with sudo privileges, as described in steps 1-4 in the initial server setup of Ubuntu 14.04.

We’re also going to assume that you’ve completed a LAMP (Linux, Apache, MySQL, and PHP) installation on your Ubuntu 14.04 server. If this is not completed yet, you can follow this guide on installing a LAMP stack on Ubuntu 14.04.

Once you are finished with these steps, you’re ready to get started with this guide.

Step One — Install phpMyAdmin

To get started, we can simply install phpMyAdmin from the default Ubuntu repositories.

We can do this by updating our local package index and then using the aptpackaging system to pull down the files and install them on our system:

sudo apt-get update
sudo apt-get install phpmyadmin

This will ask you a few questions in order to configure your installation correctly.

  • For the server selection, choose apache2.  Note: If you do not hit “SPACE” to select Apache, the installer will not move the necessary files during installation. Hit “SPACE”, “TAB”, and then “ENTER” to select Apache.
  • Select yes when asked whether to use dbconfig-common to set up the database
  • You will be prompted for your database administrator’s password
  • You will then be asked to choose and confirm a password for the phpMyAdmin application itself

The installation process actually adds the phpMyAdmin Apache configuration file into the /etc/apache2/conf-enabled/ directory, where it is automatically read.

The only thing we need to do is explicitly enable the php5-mcrypt extension, which we can do by typing:

sudo php5enmod mcrypt

Afterwards, you’ll need to restart Apache for your changes to be recognized:

sudo service apache2 restart

You can now access the web interface by visiting your server’s domain name or public IP address followed by /phpmyadmin:


phpmyadmin login screen

You can now log into the interface using the root username and the administrative password you set up during the MySQL installation.

When you log in, you’ll see the user interface, which will look something like this:

phpmyadmin user interface

Step Two — Secure your phpMyAdmin Instance

We were able to get our phpMyAdmin interface up and running fairly easily. However, we are not done yet. Because of its ubiquity, phpMyAdmin is a popular target for attackers. We need to secure the application to help prevent unauthorized use.

One of the easiest way of doing this is to place a gateway in front of the entire application. We can do this using Apache’s built-in .htaccess authentication and authorization functionalities.

Configure Apache to Allow .htaccess Overrides

First, we need to enable the use of .htaccess file overrides by editing our Apache configuration file.

We will edit the linked file that has been placed in our Apache configuration directory:

sudo nano /etc/apache2/conf-available/phpmyadmin.conf

We need to add an AllowOverride All directive within the <Directory /usr/share/phpmyadmin> section of the configuration file, like this:

<Directory /usr/share/phpmyadmin>
    Options FollowSymLinks
    DirectoryIndex index.php
    AllowOverride All
    . . .

When you have added this line, save and close the file.

To implement the changes you made, restart Apache:

sudo service apache2 restart

Create an .htaccess File

Now that we have enabled .htaccess use for our application, we need to create one to actually implement some security.

In order for this to be successful, the file must be created within the application directory. We can create the necessary file and open it in our text editor with root privileges by typing:

sudo nano /usr/share/phpmyadmin/.htaccess

Within this file, we need to enter the following information:

AuthType Basic
AuthName "Restricted Files"
AuthUserFile /etc/phpmyadmin/.htpasswd
Require valid-user

Let’s go over what each of these lines mean:

  • AuthType Basic: This line specifies the authentication type that we are implementing. This type will implement password authentication using a password file.
  • AuthName: This sets the message for the authentication dialog box. You should keep this generic so that unauthorized users won’t gain any information about what is being protected.
  • AuthUserFile: This sets the location of the password file that will be used for authentication. This should be outside of the directories that are being served. We will create this file shortly.
  • Require valid-user: This specifies that only authenticated users should be given access to this resource. This is what actually stops unauthorized users from entering.

When you are finished, save and close the file.

Create the .htpasswd file for Authentication

Now that we have specified a location for our password file through the use of the AuthUserFile directive within our .htaccess file, we need to create this file.

We actually need an additional package to complete this process. We can install it from our default repositories:

sudo apt-get install apache2-utils

Afterward, we will have the htpasswd utility available.

The location that we selected for the password file was “/etc/phpmyadmin/.htpasswd“. Let’s create this file and pass it an initial user by typing:

sudo htpasswd -c /etc/phpmyadmin/.htpasswd username

You will be prompted to select and confirm a password for the user you are creating. Afterwards, the file is created with the hashed password that you entered.

If you want to enter an additional user, you need to do so without the -c flag, like this:

sudo htpasswd /etc/phpmyadmin/.htpasswd additionaluser

Now, when you access your phpMyAdmin subdirectory, you will be prompted for the additional account name and password that you just configured:


phpMyAdmin apache password

After entering the Apache authentication, you’ll be taken to the regular phpMyAdmin authentication page to enter your other credentials. This will add an additional layer of security since phpMyAdmin has suffered from vulnerabilities in the past.


You should now have phpMyAdmin configured and ready to use on your Ubuntu 14.04 server. Using this interface, you can easily create databases, users, tables, etc., and perform the usual operations like deleting and modifying structures and data.

To learn how to further secure your interactions with the server by encrypting your communication with SSL, check out our article on setting up SSL certificates with phpMyAdmin.

Leave a Comment